NOVUS B 4FC re+new

  • Sustainable flat-clinch stapler for everyday professional use
  • Full-metal device with shiny plastic casing made of sustainable recyclat
  • Press button loading system with double staple guide for precision stapling
  • Proven system in flat-clinch staplers for permanent and non-permanent stapling and pinning
  • Weight: approx. 265 g
  • Includes 200 staples of type 24/6 DIN SUPER
显示更多

By pressing a button at the rear of the stapler, the staple magazine is released for front loading.

Quick and easy stapling with Novus staplers

Movable anvil for temporary and permanent stapling

The minimum amount of space taken up by staple ends optimises binder capacity. Despite flat-clinch stapling, staples are easily removed from paper with a staple remover.

With stapling legs resting flat against the paper, flat-clinch stapling cuts filling space by as much as 30 %.

With the two-stage stapling action, the staple legs pierce the paper first. The staple ends are then bent over and pressed absolutely flat against the paper.

The possible stapling style:

Stapling technologyflat-clinch
MaterialTool with metal functional parts
Sheet capacity (80g/sqm)*50
Stapling methodRemovable
Loading capacity100 x staple 24/6 – 24/8
150 x HK 26/6-26/8
Throat depth60 mm
Loading systemPress button loading system
Guarantee25 years
ComplianceThis machine bears the GS approval of product safety.
German Engineering by Novusyes
ModelOffice stapler
Staple type24/6
24/8
26/6
26/8
Area of applicationIndustrial office
SustainabilityEnvironmentally friendly production
recycled plastic
RangePower

* Maximum number of sheets (80 g/sqm) which can be cut in a single pass

常见问题解答

Why can I only staple once even though the stapler is filled with staples?

You are not using original Novus stacks. The stacks from other manufacturers are incorrectly bent and therefore jam on the stacking carrier and cannot be pushed forward. Original Novus stacks are absolutely true to size and can be easily pushed...


Why does the perforator (B225, B240, B260, B425) stay down after actuation and does not release the paper?

The machine was held at an angle when punching and the lock for the rest position is engaged. To unlock, hold the perforator straight and press again. We recommend punching on the table as shown in the picture, then the perforator cannot lock.


Why do the staple ends not go far enough through the paper when stapling?

For the paper thickness, the staple is chosen too short. The following basic rule applies: 10 sheets of standard paper (80g/sqm) are approx. 1 mm thick. The paper stack height plus 3 mm gives the appropriate staple leg length.


Why do the staple ends come out at the top when stapling?

For the paper thickness, the staple is chosen too long. The following basic rule applies: 10 sheets of standard paper (80g/sqm) are approx. 1 mm thick. The paper stack height plus 3 mm gives the appropriate staple leg length.